Print Size Calculator

This print size calculator turns pixels and dpi into a print size: enter image width and height in pixels and the wanted resolution, then read the size in inches and centimeters and the formats that fit.

Example: Image width 6,000 pixels · Image height 4,000 pixels · Wanted resolution 300 dpi → Print size: At 300 dpi: 20 × 13.3 inches (50.8 × 33.9 cm), 24 megapixels. Source: Wikipedia – Pixel density (ppi, conversion between pixels and length). Updated: .

pixels
pixels
dpi
adjustable guide value: 300 is the usual figure for photos viewed at arm’s length, large posters often need less
My ToolboxYour inputs are saved in this browser only.

Result

Print size
At 300 dpi: 20 × 13.3 inches (50.8 × 33.9 cm), 24 megapixels
Common formats at a glance
FormatPixels needed at target dpiYour image on this format (ppi)Enough?
4 × 6 in (10.2 × 15.2 cm)1,800 × 1,2001,000yes
10 × 15 cm1,772 × 1,1821,016yes
5 × 7 in (12.7 × 17.8 cm)2,100 × 1,500800yes
13 × 18 cm2,126 × 1,536782yes
8 × 10 in (20.3 × 25.4 cm)3,000 × 2,400500yes
20 × 30 cm3,544 × 2,363508yes
A4 (21 × 29.7 cm)3,508 × 2,481484yes
11 × 14 in (27.9 × 35.6 cm)4,200 × 3,300364yes
A3 (29.7 × 42 cm)4,961 × 3,508342yes
40 × 60 cm7,087 × 4,725254no
A2 (42 × 59.4 cm)7,016 × 4,961242no
50 × 70 cm8,268 × 5,906203no
A1 (59.4 × 84.1 cm)9,934 × 7,016171no
How it is calculated
  • Size in inches = pixels ÷ dpi; times 2.54 for centimeters. At 300 dpi every inch takes 300 pixels.
  • The table treats landscape and portrait alike: your image is placed on the format so that the resolution stays highest.
In everyday use dpi and ppi are treated as the same: ppi are image pixels per inch, dpi printed dots. For size the image resolution counts. How sharp a print looks also depends on the viewing distance.

How it is calculated

A photo of 6000 × 4000 pixels prints at 20 × 13.3 inches (50.8 × 33.9 cm) at 300 dpi; for an A4 sheet you need at least 2481 × 3508 pixels at 300 dpi. The calculator converts pixels to inches and checks which formats your image fills sharply.

How it is calculated

The print size in inches is the pixel count divided by the resolution in dpi, in centimeters times 2.54. 6000 pixels at 300 dpi make 20 inches or 50.8 cm. The table turns the calculation around: for common formats it lists the pixels needed at your target resolution and the resolution your image actually reaches on that format. If it is below the target the table says “no”; the image can still be printed but looks softer up close.

Which dpi make sense?

More image tools: the pixel calculator, the image sizes for social media and the aspect ratio.

Frequently asked questions

How do I calculate print size from pixels?

Divide the pixels by the dpi and multiply by 2.54 for centimeters. 6000 pixels at 300 dpi are 20 inches or 50.8 cm.

How many pixels do I need for 8×10 inches?

At 300 dpi, 2400 × 3000 pixels; at 150 dpi half of that.

Which dpi does a photo need?

For photos viewed at arm’s length 300 dpi is the standard. Larger formats are viewed from farther away, so 150 to 200 dpi are often enough.

What is the difference between dpi and ppi?

ppi counts image pixels per inch, dpi printed dots per inch. In everyday use both are treated as the same for resolution.

Sources and legal basis

As of: · Editorial policy

Related tools