Bar to psi converter
This calculator converts bar to psi: 1 bar is 14.504 psi, so 2.5 bar is about 36.26 psi. Pascal, kilopascal, millibar, atmosphere, mmHg and water column convert instantly too – handy for tire pressure, compressors and weather data.
Example: Value 2.5 · from: Bar (bar) · to: Pounds per square inch (psi) → Result: 2.5 bar = 36.259 psi. Source: NIST SP 811, Appendix B.8 – factors for units listed alphabetically. Updated: .
How it is calculated
Bar to psi: the formula
psi = bar × 14.5038. In reverse, bar = psi ÷ 14.5038 (which is psi × 0.0689476).
- 1 bar = 14.504 psi
- 2.5 bar = 36.26 psi
- 32 psi = 2.206 bar
How the units are defined
1 bar is exactly 100,000 Pa (100 kPa, 1,000 hPa). 1 psi is the force of one pound (lbf) on one square inch: 6,894.757 Pa. The standard atmosphere is fixed at 101,325 Pa (1.01325 bar = 14.696 psi), and 1 Torr is 1/760 of that. One conventional millimeter of mercury is 133.322 Pa; 1 bar equals 750.06 mmHg.
psi, psig and psia
The number converts the same way in both cases. What matters is the reference: psig and bar(g) are measured relative to ambient pressure, psia and bar(a) absolutely against vacuum. A tire at 2.5 bar gauge is about 3.5 bar absolute.
Water column for a feel
One bar equals about 10.2 m of water – at 10 m depth the water adds roughly another 1 bar on top of atmospheric pressure.
Honest limits
The calculator only converts units. The permitted tire or operating pressure is given in the vehicle or equipment manual and on the rating plate.
Frequently asked questions
How many psi is 1 bar?
1 bar is 14.504 psi. 2 bar is 29.01 psi and 3 bar is 43.51 psi.
How do I convert bar to psi?
Multiply the value in bar by 14.5038: 2.5 bar × 14.5038 = 36.26 psi. As a rule of thumb, × 14.5 is close enough.
How many bar is 32 psi?
32 psi is 2.206 bar – a typical car tire pressure in the US.
What is the difference between psi and psig?
psi is the unit; psig means gauge pressure above ambient, psia means absolute pressure. The two differ by about 14.7 psi of atmosphere.
How many bar is 1 atm?
One standard atmosphere is 1.01325 bar or 14.696 psi.
Sources and legal basis
- NIST SP 811, Appendix B.8 – factors for units listed alphabetically
- BIPM – SI Brochure, Table 8: non-SI units accepted for use with the SI (bar, conventional mmHg, nautical mile, hectare)
As of: · Editorial policy
Related tools
- Sea level pressure calculatorSea level pressure calculator: convert your barometer’s station pressure and elevation to sea level pressure (altimeter setting) and back, in inHg, hPa or mmHg.
- Bar to kPa converterBar to kPa: multiply by 100, so 2.2 bar = 220 kPa. Convert bar to kilopascals or kPa to bar, with psi, atmospheres, megapascals and a pressure chart.
- kPa to psi and psi to kPa converterkPa to psi: divide by 6.894757, so 220 kPa = 31.908 psi. Type kilopascals for psi (with bar and atm), or psi for kPa, with a tire-pressure chart.
- Tire Pressure Temperature CalculatorTire pressure temperature calculator: see how much psi your tires lose in the cold, a chart from 10 to 90 °F, and what to inflate to in a warm garage.
- Hydraulic cylinder calculator: push and pull force, speed and oil volumeHydraulic cylinder calculator: push and pull force from bore, rod and pressure, plus extend and retract speed, oil volume and cycle time – in psi or bar.
- Pneumatic cylinder force calculator with load factor and air consumptionPneumatic cylinder force calculator: extend and retract force from bore, rod and pressure, usable load with SMC load factor, minimum bore and air consumption.
- kg to lbs converterConvert kg to lbs and back: 1 kg = 2.2046 lb. Shows pounds and ounces, stone and pounds, grams, tons and a kg to lbs chart – exact to the legal definition.
- Turkey cooking time calculatorTurkey cooking time calculator: how long to roast a turkey at 325 °F by weight – stuffed or unstuffed, from frozen, plus thawing time, per the USDA timetable.
- Drywall calculator for stud wallsDrywall calculator for metal stud walls: number of sheets, studs and track, screws and joint compound – one or two layers, 16 or 24 inch stud spacing.